BOSCH REXROTH
0811405127
$1,085.47 USD
- BOSCH REXROTH
- Material:0811405127
- Model:VT-MSPA1-525-10/V0
Quantity in stock: 0
The Bosch Rexroth VT-MSPA 1-525-10/V0 (0811405127) is a sophisticated electronic control device designed to manage and regulate hydraulic systems with precision. This model features a differential input for voltage, which allows for fine-tuning and control over the system's performance. It is equipped with a ramp generator that has separately adjustable ramp times for both "up" and "down" operations, providing users with the capability to set acceleration and deceleration curves according to specific requirements. The adjustable zero point and sensitivity functions of the Bosch VT-MSPA 1-525-10/V0 enhance its versatility, making it suitable for a wide range of applications where precise control of movement or pressure is necessary. Its clocked power output stage ensures that power delivery is consistent and reliable, which is crucial for maintaining system stability and preventing unexpected fluctuations that could lead to wear or damage. Additionally, this model includes LED displays that indicate various operating states, allowing users to monitor the system's status at a glance and make adjustments as needed. The removable connector strip simplifies installation and maintenance, providing an easy way to disconnect the controller without having to remove individual wires. Overall, the Bosch VT-MSPA 1-525-10/V0 (0811405127) is engineered for those who require exacting control over their hydraulic systems. Its advanced features ensure it can be tailored to meet the demands of complex applications while maintaining high levels of performance and reliability.
|
01 |
02 |
03 |
04 |
|||
|
VT-MSPA1 |
‒ |
525 |
‒ |
1X |
/ |
V0 |
|
01 |
Valve amplifier for proportional valves without electrical position feedback, Analog, Modular design |
VT-MSPA1 |
|
02 |
For valves: |
525 |
|
03 |
Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions) |
1X |
|
04 |
Version: standard |
V0 |
General
|
Component series |
1X | ||
|
Material number |
Data sheet |
1819929085 | |
|
Type of electronics |
Analog | ||
|
Design |
Modul | ||
Voltage supply
|
Operating voltage |
nominal |
U |
V |
24 |
|
Lower limit value |
UB(t)min |
V |
21 | |
|
Upper limit value |
UB(t)max |
V |
40 | |
|
Power consumption |
max. |
Smax |
VA |
60 |
|
Current consumption |
max. |
Imax |
A |
2.5 |
Analog inputs
|
Command value source |
Potentiometer 10 kΩ supplied with 10 V internal reference voltage, external signal source | ||||
|
Command value |
Voltage (differential input) |
U |
V |
0 ... 10 | |
|
Voltage (differential input) |
Input resistance |
R |
kΩ |
≥ 100 | |
Digital inputs
|
Ramp switch-off |
U |
V |
6 ... 40 |
Solenoid outputs
|
Solenoid current |
max. |
Imax |
A |
2.5 |
|
Solenoid output |
Power |
Smax |
VA |
55 |
|
Solenoid output |
other properties |
Clocked current controller | ||
|
Cable length |
for 1.5 mm2 |
L |
m |
20 |
|
for 2.5 mm2 |
L |
m |
50 |
Adjustment options
|
Zero point calibration information |
Set with Ue = 0.3 ... 0.5 V | |||
|
Sensitivity “gain” |
Setting condition |
With command value U = 10 V | ||
|
Zero point “zero” |
Setting condition |
With command value U = 0.3 ... 0.5 V | ||
|
Ramp time up/down |
t |
s |
0.05 … 5 | |
Displays
|
LED display |
Green |
Enable | |
|
yellow |
Ramp off | ||
|
red |
UB too low |
Supplementary information
|
Reference voltage |
Potentiometer supply |
U |
V |
10 (Imax = 10 mA) |
|
Special features |
Fast energization for short actuating time | |||
|
Anschlussart |
Connector, 10-pole (screw terminal) | |||
|
Mounting type |
Top hat rail TH35-7.5 or G rail G32 according to EN 60715 | |||
|
Ambient temperature range |
ϑ |
°C |
0 … 70 | |
|
Storage temperature range |
ϑ |
°C |
-20 … 70 | |
|
Weight |
m |
kg |
0.31 | |
For applications outside these parameters, please consult us!
Dimensions in mm
Dimensions in mm
The distance to aerial lines, radios and radar systems must be sufficient (> 1 m).
Do not lay solenoid and signal lines near power cables.
For signal lines and solenoid conductors, we recommend using shielded cables.
The cable shield must be connected to the control cabinet extensively and as short as possible.
The cable lengths and cross-sections specified must be complied with.
Use of ramps
Setting of ramp UP (accelerations) and ramp DOWN (braking) via 1 trimming potentiometer each.
ramp ON, if at the input connection 3 = 0 V (open) is applied.
Ramp OFF, if at the input connection 3 = 24 V is applied (switching range see technical data). In case of ramp OFF, any ramp started before will be canceled. Transition to the signal end value is effected by means of a step.
Settings
Setting zero: with 0.5 V signal (min. 0.3 V) at connection 2.
Setting max.: with 10 V signal at connection 2.